Analytical Modeling for Translating Statistical Changes to Circuit Variability by Ultra-Deep Submicron Digital Circuit Design

This paper presents a physics-based compact gate delay model that includes all short-channel phenomena prevalent at the ultra-deep submicron technology node of 32 nm. To simplify calculations, the proposed model is connected to a compact α-power law-based (Sakurai-Newton) model. The model has been tested on a wide range of supply voltages. The model accurately predicts nominal delays and the delays under process variations. It has been shown that at lower technology nodes, the delay is more sensitive to threshold voltage variations, specifically at the sub-threshold operating region as compared with effective channel length variations above the threshold region.     

Effect of organic solvent on the cold sintering processing of SrFe12O19 platelet-based permanent magnets

In this work we have investigated the effect of the solvent during the processing of SrFe₁₂O₁₉ platelet-based permanent magnets by cold sintering process (CSP) plus a post-thermal treatment. Several organic solvents: glacial acetic acid, oleic acid and oleylamine have been analyzed, optimizing the CSP temperatures at 190?270 °C, under pressures of 375?670 MPa and 6?50 wt% of solvent. Modifications in the morphological and structural properties are identified depending on the solvent, which impacts on the magnetic response. Independently of the solvent, the mechanical integrity of ferrite magnets obtained by CSP is improved by a post-annealing at 1100 °C for 2 h, resulting in relative densities around 92 % with an average grain size of 1 μm and a fraction of SrFe₁₂O₁₉ phase >91 %. H_C ≥ 2.1 kOe and M_S of 73 emu/g are obtained in the final sintered ceramic magnets, exhibiting the highest H_C value of 2.8 kOe for the magnet sintered using glacial acetic acid.     

A design method of data analytics process for condition based maintenance

Many condition monitoring systems use data analytics processes such as anomaly detection to understand machine conditions. Such data analytics processes have been designed by data scientists. However, domain knowledge is indispensable for designing the process, and data scientists have difficulty in acquiring such knowledge from domain engineers. This paper proposes a design method of data analytics processes and an engineering tool. In this method, data scientists propose hypotheses about each step of the process to domain engineers. Then, data scientists update the process on the basis of feedback from domain engineers. The engineering tool helps data scientists to interact with domain engineers.     

Digital image correlation for strain measurement in plastic film blowing process

Surface deformation study of a polymer film during plastic film blowing (PFB) extrusion process though is considered essential, is difficult to execute as the process is fast and continuous. Digital image correlation (DIC) is an optical technique that is non-destructive, highly accurate and designed to measure deformations from micro to macro scale. DIC can be proposed as a reliable tool to understand the relationship of polymer structure-processing-properties. In this literature, digital image correlation, its basic principle of operation and reliability guided DIC for continuous large deformation are comprehensively explored. Versatility of DIC, and the conditions that affect the measurement algorithm as well as preceding use of DIC in polymer processes are reviewed. The implementation and potential use of DIC in PFB are described.

This review was submitted as part of the 2019 Materials Literature Review Prize of the Institute of Materials, Minerals and Mining run by the Editorial Board of MST. Sponsorship of the prize by TWI Ltd is gratefully acknowledged.     

基于“炉机对应”原则的连浇优化方案

国内某炼钢厂为保证浇注周期较短的2号连铸机连浇，多座转炉需同时向该连铸机供应钢水，导致炉 机对应关系不明确，生产组织难度较大。通过对该厂炼钢 连铸过程的工序作业周期与生产运行模式进行解析，在保证连铸机连浇的基础上，探究合理的炉 机对应关系，改善该厂的生产顺行。结果表明，在“一一对应”运行模式下，2号连铸机最大连浇炉数仅为6炉；而在“定炉对定机”运行模式下，若适时接受3号转炉冶炼的钢水，2号连铸机最大连浇炉数可延长至19炉。在此基础上，通过对连铸机“柔性”的优化和钢水供应的合理调配，2号连铸机可满足实际生产的连浇要求。此外，运用“炉→机”匹配度进行评价，计算结果表明优化后的炉 机对应关系得到显著改善。     

Two-level intelligent modeling method for the rate of penetration in complex geological drilling process

The rate of penetration (ROP) model is of great importance in achieving a high efficiency in the complex geological drilling process. In this paper, a novel two-level intelligent modeling method is proposed for the ROP considering the drilling characteristics of data incompleteness, couplings, and strong nonlinearities. Firstly, a piecewise cubic Hermite interpolation method is introduced to complete the lost drilling data. Then, a formation drillability (FD) fusion submodel is established by using Nadaboost extreme learning machine (Nadaboost-ELM) algorithm, and the mutual information method is used to obtain the parameters, strongly correlated with the ROP. Finally, a ROP submodel is established by a neural network with radial basis function optimized by the improved particle swarm optimization (RBFNN-IPSO). This two-level ROP model is applied to a real drilling process and the proposed method shows the best performance in ROP prediction as compared with conventional methods. The proposed ROP model provides the basis for intelligent optimization and control in the complex geological drilling process.     

On global Hessenberg based methods for solving Sylvester matrix equations

In the first part of this paper, we investigate the use of Hessenberg-based methods for solving the Sylvester matrix equation $AX+XB=C$. To achieve this goal, the Sylvester form of the global generalized Hessenberg process is presented. Using this process, different methods based on a Petrov–Galerkin or on a minimal norm condition are derived. In the second part, we focus on the SGl-CMRH method which is based on the Sylvester form of the Hessenberg process with pivoting strategy combined with a minimal norm condition. In order to accelerate the SGl-CMRH method, a preconditioned framework of this method is also considered. It includes both fixed and flexible variants of the SGl-CMRH method. Moreover, the connection between the flexible preconditioned SGl-CMRH method and the fixed one is studied and some upper bounds for the residual norm are obtained. In particular, application of the obtained theoretical results is investigated for the special case of solving linear systems of equations with several right-hand sides. Finally, some numerical experiments are given in order to evaluate the effectiveness of the proposed methods.     

Decomposition process of bastnaesite concentrate in NaOH-CaO-H_2O system

A novel process of calcification-leaching for bastnaesite concentrate(REFCO_3) was proposed. The prior calcification was carried out in the system of NaOH-CaO-H_2O and the lgC-pH pattern for Ce-F-Ca-C-H_2O system was drawn. The thermodynamics result indicates that decomposition for bastnaesite requires certain alkaline condition, but excessive alkalinity also causes decomposition of CaF_2. XRD and SEM-EDS analyses on the calcification-leaching process reveal that bastnaesite first decomposes into RE(OH)_3 and CaF_2. Then, by HCl leaching rare earths were extracted,while CaF_2 was left in the leaching residue. In addition, effects of temperature, time, NaOH and CaO on the calcification were investigated. The results show that the leaching rate of rare earths(REs)reaches 72.5 wt%, at the same time 99.2 wt% of F is left in leaching residue with 20 wt% NaOH and 38 wt% CaO at 493 K for 180 min.     

高伸长率冷轧双相钢DP980显微组织及性能

摘要：为了进一步提高冷轧双相钢DP980的强塑性，采用低C-Si-Mn-Nb-Cr成分，通过调整连续退火工艺参数，系统研究了工艺组织性能的关系，利用OM、SEM、EBSD分析了不同退火温度条件下各相的比例、尺寸、形貌、分布，同时利用力学拉伸试验手段研究了连退两相区退火温度对强塑性的影响。结果表明，通过优化调整连续退火工艺，不仅可以在冷轧铁素体和马氏体双相钢的组织上获得少量的残余奥氏体，也能细化再结晶晶粒，最终获得ReL/Rm≤0.5、高伸长率A50≥15%的冷轧DP980，提高强塑性的同时改善了成型性能。